Silvalure Fly & Wasp Trap

Instructions For Use

1. Remove clear plastic top of trap by holding the base and twisting apart.
2. Discard contents and wash with clean water.
3. Refill base to 2.5-3 cm depth (approx. 1 inch) with fresh liquid bait.
4. To reassemble the trap, insert the lugs on the base into the slots on the clear plastic top and twist to lock the two sections together.
5. Relocate the trap where required, preferably in a shaded position.

Repeat this procedure as the liquid level falls by evaporation, or when full of trapped insects. It is advisable to check the condition of the string or wire used to suspend the trap – if this is frayed or damaged it should be replaced.